|
|
| |
1.使用前，务必将管路阀门表面的水分、油、污垢等清除再在其表面上缠绕。
Before taping, must be removed moisture, oil, dirt, etc, on applying surface.
2.缠绕前,用剪刀连同背衬膜一起剪下比需要量稍长的一段,背膜不要去除.
Before placing the tape, using scissors, etc., cut it in length slightly longer than you need with the backing film still un-removed.
3.剥离背衬膜.
Peel off the backing film.
4.施工时，需紧缠防溅带,使其紧紧贴附于管路表面。
Wrap No Fire tape with enough tension to assure conformability to the surface.
5.为了达到防溅带的最佳性能,建议在缠绕时，应将后缠的一圈压住先缠的一圈至少1/3以上。
Recommend to apply the tape with at least 1/3 overlap for better performance.
6.拆卸防溅带时，请用剪刀、切割刀来剪断。拆下的防溅带不能重复使用。
Use scissors, a cutter, ect., to remove No Fire tape. Removed tape can not be reused.
|
|
|
|
